Copy and paste this code:
Create a project variation named:
| Qty | Part | Specific Use | Recommended Purchase |
|---|---|---|---|
| Structure | |||
| 1 | 153 Silicone O-Ring | Better prices may be available on Amazon | |
| 1 | 1 1/8" ID Nylon 6/6 Tube | Sufficient for 3 sets of battery packs | |
| 1 | 316 Stainless Threaded Rod M5 | Sufficient for 2 sets | |
| 1 | 316 Stainless Lock Nut M5 | Sufficient for 12 sets | |
| 1 | 316 Stainless Steel Hex Nut M5 | Sufficient for 12 sets | |
| 1 | Hysol E-90FL | Sufficient for 4 sets (for waterproofing entrance of cable in electronics tube) | |
| 1 | Applicator Gun | Reusable | |
| 2 | Mixer Nozzle | ||
| 1 | Acrylic Sheet 3mm Thick, 610mm Long, 460mm Wide, Blue | For main structure | |
| 1 | Acrylic Sheet 3mm Thick, 480mm Long, 200mm Wide, Clear | For end caps | |
| 1 | Acrylic Sheet 3mm Thick, 200mm Long, 240mm Wide, White | For end caps and vertical prop guard | |
| 1 | Clear Cast Acrylic Tube 100mm OD x 94mm ID, 180mm Length | For Electronics tube | |
| 1 | Clear Cast Acrylic Tube 80mm OD x 74mm ID, 150mm Length | props shrouds (15cm is the minumum size from this provider) | |
| 1 | 1 1/4" Rubber cap | For battery tubes (sufficient for 2 sets) | |
| Propulsion | |||
| 3 | 800kv Brushless Motor | ||
| 3 | 18A Brushless Car ESC | ||
| 3 | 76.2mm (3in) EDF Impeller | Delta-V 15 made by E-Flight (with 69mm diameter) may be better. | |
| 1 | Hitec HS-65MG Micro Metal Gear Servo | Cheaper elsewhere. Metal gears not necessary but helpful | |
| Electronics | |||
| 1 | BeagleBone Computer | ||
| 2 | Ethernet to single twisted pair adapter | ||
| 2 | Ultra Brite LED Module w/ Built-In LED Driver | ||
| 1 | Genius F100 | ||
| Other | |||
| 1 | Connectors, wiring, building supplies, etc | Miscellaneous | |
| Material/Tools | |||
| 1 | Acrylic cement | To bond together acrylics parts | |
Purchase Info
Vendor Name
Vendor Item Name or ID
Vendor Item URL
Price per Item
# to Buy for Entire Project